Henry Underlayment Products & Roofing Reinforcement
BACK TO HENRY SUPPLIER PAGE (CLICK HERE)
Henry® Eaveguard®
Henry® Eaveguard® Self-Adhered Shingle Underlayment provides a secondary line of defense to keep water that can get behind shingles from infiltrating further to help ensure the longevity of your roof.
With direct-to-deck application, Eaveguard® is designed to offer protection against water penetration caused by wind driven rain or ice damming when installed in vulnerable areas of steep-slope roofs:
- At eaves, valleys and rakes
- Roof-to-wall connections
- Flashing around chimneys and skylights
- Roof vents and other penetrations
- Full deck coverage
Henry Blueskin® PE200HT
Henry Blueskin® PE200HT High Temperature Roof Underlayment is a self-adhered roofing underlayment consisting of a high softening point, SBS rubberized asphalt compound, which is integrally laminated to a blue cross-laminated polyethylene film with a slip-resistant coating. Henry Blueskin® PE200HT adheres directly to roof decks or certain insulation panels prior to the application of finished roof coverings including architectural metal, shingles or tile.
- Serves as a full coverage-waterproofing layer in architectural metal roof assemblies
- Suitable for high temp applications often found under metal
- Self-seals when punctured by mechanical fasteners or roofing nails
- Prevents lateral moisture migration
- Provides premium slip-resistant surface for applicator safety
- Tough, “heel puncture” resistant film for use on fluted steel decking
- Eliminates concern for damage to architectural metal finish during application with non-granular surface
Henry/Bakor Blueskin® RF 200
Henry/Bakor Blueskin® RF 200 Self-Adhesive Ice and Water Barrier is an SBS modified bitumen high-temperature roofing underlayment reinforced with a textured skid-resistant polyethylene film. The membrane is specifically designed to be self-adhered on sloped roof surfaces as secondary seal under shingles or tile.
- Self-seals when penetrated by mechanical fasteners or roofing nails
- Prevents lateral moisture migration
- Provides premium skid-resistant textured blue film surface for applicator safety
- Provides split release backing for fast application
- Meets ASTM D1970 standard and is ICC listed
Blueskin® Roof Low Temp Roof Underlayment RF200LT
Blueskin® Roof Low Temp Roof Underlayment RF200LT is an SBS modified bitumen roofing membrane underlayment reinforced with a superior skid-resistant polyethylene surface film. The product uses a compound specially designed for better performance and handling in cold temperatures. It is used as a secondary waterproofing layer on slope roofs,in both residential and commercial buildings, protecting the building’s interior from damage caused by water infiltration as a result of ice dams or wind-driven rain. It is designed to be adhered directly to wood, gypsum decks or certain insulation panels prior to the application of finished roof coverings including architectural metal, shingles, cedar shakes or tile.
- Cold temperature compound allows application in colder conditions (down to 14°F / -10°C)
- Self-sealing when penetrated by mechanical fasteners or roofing nails
- Fully adhered system prevents lateral moisture migration
- Premium skid-resistant textured blue film surface
- Split release backing for fast application
- Meets ASTM D1970 standard
990-06 Yellow Jacket Roofing Repair Fabric
990-06 Yellow Jacket is a bright yellow, open weave glass fabric consisting of glass fibre yarn saturated with synthetic resins. The bright yellow colour helps the applicator determine when the fabric is completely embedded in the coating compound, particularly under poor lighting conditions. The glass fibre in this product will not rot, mildew nor “wick” water into the body of the coating material. 990-06 typically is used as a reinforcing membrane incorporated into many types of coatings where superior strength and toughness are required.
BACK TO HENRY SUPPLIER PAGE (CLICK HERE)