Commercial Water Resistive Air Barriers
BACK TO HENRY SUPPLIER PAGE (CLICK HERE)
Henry® Blueskin® SA
Henry® Blueskin® SA is a self-adhered water resistive air barrier consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film surface. Impermeable to air, moisture vapour and water, Blueskin® SA is designed to install easily on a variety of prepared substrates.
Similar to Blueskin® SA, Blueskin® SA LT is formulated specifically for low-temperature application.
Product Data Sheet
Safety Data Sheet
Henry® Blueskin® Metal Clad®
Henry® Blueskin® Metal Clad® is a self-adhered water resistive air barrier membrane comprised of rubberized asphalt and dual-layers of high strength polyethylene with surface layer of metallic aluminum film. Due to its metallic surfacing, Blueskin Metal Clad exhibits excellent weathering resistance when applied to above-grade wall assemblies. This vapour impermeable membrane is available in various roll widths for both membrane and flashing applications and has a removable release liner for ease of installation.
Product Data Sheet
Safety Data Sheet
Henry FOILSKIN
Henry FOILSKIN are self-adhering weather barrier membranes consisting of an SBS rubberized asphalt compound. Integrally laminated to a white, UV resistant foil/composite film, FOILSKIN is specially designed to be self-adhered to a prepared substrate, providing a durable air, vapor and weather barrier.
FOILSKIN is integrally laminated to a glass scrim reinforced aluminum foil. The membrane is specifically designed to be self-adhered to a prepared substrate, providing a weather barrier.
Product Data Sheet
Safety Data Sheet
Henry® Blueskin® VP160
Henry® Blueskin® VP160 is a self-adhered vapour permeable, water resistive air barrier consisting of an engineered film and a patented, permeable adhesive technology with split-back poly-release film. Blueskin® VP160 is fully adhered to the wall substrates in a weatherboard method without mechanical attachment.
- Meets highest industry standards for commercial air barriers
- Sheds water while allowing vapour to pass through allowing walls to drain and substrates to dry
- Creates a continuous plane of air-tightness helping to improve building thermal performance
- Fully adheres to substrates eliminating water migration
Blueskin® TG
Blueskin® TG is an SBS modified bitumen membrane reinforced with non-woven fiberglass. Designed for use as a thermofusible air barrier, Blueskin TG is impermeable to air, moisture vapour and water and primarily is used on walls of masonry, concrete, or drywall. Because of its excellent strength and adhesion it can also be used in conjunction with Bakor Liquid Membranes as a transition sheet at connections to beams, columns, windows and curtain walls. Blueskin® TG can also function as a waterproofing membrane on walls and decks.
Product Data Sheet
Safety Data Sheet
Air-Bloc® 21
Air-Bloc® 21 is a trowel consistency, solvent-type, synthetic rubber-based insulation adhesive formulated for easy application on a range of construction surfaces.
Air-Bloc® 21 is designed to provide an effective air and vapor barrier when used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation. Also available as a fire-resistive air and vapor barrier, Air-Bloc® 21FR is used as a full bed adhesive in conjunction with rigid foam or semi-rigid paper-faced insulation.
Product Data Sheet
Safety Data Sheet
Air-Bloc® 32MR
Liquid-applied by spray or trowel, this low-VOC, one-component elastomeric membrane is designed to provide an air and vapor barrier when applied to a range of construction surfaces. Air-Bloc® 32MR cures to a monolithic rubber-like membrane that resists air leakage.
- Retains flexibility over a wide temperature range
- Adheres to most construction surfaces, including block, concrete, stone, wood, metal, insulation and gypsum board
- Can be applied to damp concrete and polystyrene insulation
- Cures to a seamless elastomeric membrane that bridges cracks
- Meets CAN/CGSB-51-33 Type I requirements
Vapor-Bloc® SA
Vapor-Bloc® SA is a self-adhered vapour barrier membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue cross-laminated polyethylene film. The membrane is specifically designed to be self-adhered to a prepared substrate. Ideal application surfaces include steel decks, gypsum board and plywood or certain insulation panels prior to the application of finished roof coverings. The main function of Vapor-Bloc¨ SA is to serve as a full coverage vapour barrier and secondary waterproofing layer in the composition of roof assemblies.
- 48” wide roll provides increased coverage over steel decks
- SBS modified membrane can be applied in temperatures as low as –12°C
- Excellent adhesion to prepared substrates of steel decks, gypsum board, concrete, plywood
- Excellent compatibility with Bakor adhesives and air barrier membranes
- Self adhesive, no flame required
Henry® Air-Bloc® 16MR
Henry® Air-Bloc® 16MR is a liquid-applied, vapour impermeable air and water barrier when applied to above-grade wall assemblies. It is single-component, water-based and cures to a tough monolithic rubber-like membrane, which resists air leakage and water penetration. Air-Bloc® 16MR includes an antimicrobial technology to create an integral mould resistant membrane, and offers a broad application temperature range with a proprietary fire resistance technology.
Henry’s Air-Bloc® 17MR
Liquid-applied by roller, brush or spray, Henry’s Air-Bloc® 17MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces and can be applied down to 20°F (-6°C). Air-Bloc® 17MR cures to a tough, monolithic rubber-like membrane.
Henry® Air-Bloc® All Weather STPE™
A vapor permeable membrane with long-term UV resistance, Henry® Air-Bloc® All Weather STPE™ is a single-component, moisture cure Silyl Terminated Polyether (STPE) water-resistive air barrier. Featuring a high solids content and quick cure time, Air-Bloc® All Weather STPE™ can be applied with rain in the forecast, helping to reduce job-site weather delays. Its hydrophobic nature also means it won’t wash off in the rain. Plus, it can be spray-, roller- or brush-applied. Air-Bloc® All Weather STPE™ is part of the Air-Bloc® portfolio of fluid applied air barriers within the Henry® Building Envelope Systems® family.
Henry/Bakor Air-Bloc® 31MR
Liquid-applied with a trowel or spray, Henry/Bakor Air-Bloc® 31MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc® 31MR cures to a tough, monolithic rubber-like membrane.
Henry/Bakor Air-Bloc® 33MR
Henry/Bakor Air-Bloc® 33MR is a UV-resistant, one-component, elastomeric membrane that provides an air barrier on a range of construction surfaces. Liquid-applied with a trowel or spray, Air-Bloc® 33MR cures to a tough, monolithic rubber-like membrane that resists air leakage along with UV radiation and weather.
BACK TO HENRY SUPPLIER PAGE (CLICK HERE)